• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Modding Questions

ms3206 said:
If im running at a good operating temp and my fuel trim is not too lean do I have anything to worry about? I have no dtcs when I hook into a scan tool.
Click to expand...
KR Is going to happen on a stock 04+ with a 3.4 pulley no matter what your fuel trims and operating temps are. I would imagine you'd be getting KR at WOT at any speed and quite a bit of it. It's not going to throw a code until its too late. You need a scanner or aeroforce to monitor KR. If you're KR free with nothing but a CAI with a 3.4 on an 04+ I'd be beyond shocked. Like spotting raptor jesus fighting the flying spaghetti monster type shocked.

Go back to a 3.8 pulley until you get some mods, and don't go WOT until you do go back.
 


You must log in or register to reply here.
Back
Top