• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Midnightblue rebuilding his engine once again!!!!!

MidnightBlue

MidnightBlue

Banned
So on my way home for lunch going about 90, then my low oil presure light came on......right away i was like :th_angry-censored: I put some oil i had in the motor so i could limp it home only 2 blocks away. I jacked up the car and oil it coming from the oil neck for the filter, i lost a rod cause i can here it banging around when i crank over the motor........so here come the new build
  1. JE Forged Pistons .20 over
  2. ZZP 4340 H-Beam Connecting Rods (Roating assambley will be balanced)
  3. 8 Rib SFI Balancer (not sure)
  4. XP Cam
  5. Rollermaster Double Chain
  6. 60 lb injectors
  7. Intercooler
  8. 3.2 pulley
  9. ARP mains and rod bolts
  10. Port the heads more
  11. Have block heat tanked, decked, and new freeze plugs installed
  12. All new bearings
 
Last edited:




You must log in or register to reply here.
Back
Top