• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

meth injection gen v location ideas

shawnrandolph

shawnrandolph

New member
Hey just got a meth injection installed like 2 weeks ago. Dropped 2 pulleys, so im at a 3" and have 21 degrees of timing at wot.

Right now I tapped the evap on my gen V for the meth nozzle. It shoots right into the blower. My question is, is this a good location or is putting it on the tb or intake better.

I will be making a fogger setup in the intake when I do heads and intercooler this winter.
 
Last edited:


Re: meth location ideas

I dont know anything about methanol injection (sry) but what caught my eye was the title of your thread!! :th_wtf: Made me think you were asking for a meth lab location lawl
 
:th_policelights::th_policelights::th_policelights:
LOL LOL


iirc its not a good idea to spray before the rotors.... wouldnt it hurt the coating on the rotors?

:edit: ok i guess i was wrong....
 
Last edited:
does not hurt the coating on the rotors. i sprayed an M5 nozzle through the blower for 6 months with zero ill effects.

any location you can get it in would be fine. spraying after the blower is going to take a little more ingenuity because you need to make sure you fog the LIM nicely to evenly disperse the meth. however, if you spray before the rotors it will do it on its own so i'd say you're good with that location.
 


also for the mods I have what size nozzle do you recommend. I have a 4g/h right now I know its small. I am running straight M1 right now with a little winshield washer fluid just so use the water to cool the charge due to no intercooler YET.
I was thinking I need about a 7gph nozzle.
 
You must log in or register to reply here.
Back
Top