• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Master cylinder replacement

kissmyss

kissmyss

New member
I need to replace my master cylinder 4 wheel abs, I've watched some video's on youtube and they bench bled the master cylinder before installation. Once it was installed, they had someone push the brake peddle and they cracked each line connected to the master cylinder to bleed the air. The car was then put back in service and the brakes worked fine. I've read elsewhere that when the master cylinder is changed, you need to have the dealer bleed the brakes. Can I do it like the youtube video and use my power bleeder to bleed the brakes at the caliper?
 


just like the vid for your car. id also bleed the calipers, may as well flush the fluid too while your at it.

a 97-98 would need to re home the abs with a tech to or snap on scanner.
 
You must log in or register to reply here.
Back
Top