• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Marofan's Mullet Car

Re: Project "Stifler's Mom" Updated with motor carnage Pix

I'm still confused why you brought up FWD to begin with
The video was of a RWD Camaro with an xp cam. Had nothing to do with FWD

Got some new exhaust bolts today too. I'll keep you guys updated to wether or not the motor actually gets put in this weekend...were starting on it for sure.
 
Last edited:


Re: Project "Stifler's Mom"

1st motor=big effin hole and various cracks throught..no biggie...will post more pics later
2nd motor=cracked by the motor mount when i got it but didn't know cuz it's hidden....i found out when i tried putting the oil pan off the old motor on the new one cuz it was dented up and one of the bolts wouldnt tighten down FML....I need another motor....i guess ill part this one out....idk
 
Re: Project "Stifler's Mom"

My milkshake brings all the...well i dont have a milkshake...

006.jpg

007.jpg



"Connecting rod"

010.jpg


This hole is in the middle cylinder driver side (I forget which number) but the crack goes almost all the way up to the front as seen in this pic. You can see the hole on the very right side

012.jpg


This pic is crappy...but it shows the crack going to the back of the block...hole is on the very left this time.

014.jpg


Random cracks...

015.jpg

017.jpg


Pistons and the connecting rod again. If you look at the very right piston and then go down theres a broken bolt also.

020.jpg


This would be a "bearing"

021.jpg


My pistons worship me.

022-1.jpg
 
Re: Project "Stifler's Mom" Updated with motor carnage

And the "good" replacement motor...or so we thought until i couldnt tighten down an oil pan bolt and come to find out the block was cracked...then we popped a chunk out of it...blurry pic sorry guys....i dont know what the deal was with my camera...musta had it on the wrong setting or something.

023.jpg
 
Last edited:


Re: Project "Stifler's Mom" Updated with gauge pix

Pix of my gauges, kinda blurry again, i dont know whats up with this camera:

017.jpg

016.jpg

015.jpg

018.jpg


I also have a shifter overlay that reads like this:

P-NOTHING
R-C
N-A
D-M
OD-A
2-R
1-O
 
Last edited:
Re: Project "Stifler's Mom" Updated with gauge pix

Haha, love the gauges.
I wanna seem them on the car though.
Nasty engine damage, looks similar to mine, when it blew 2 years ago..
 


Re: Project "Stifler's Mom" Updated with gauge pix

bump so you can update this thread yo.
 


Re: Project "Stifler's Mom" Updated with gauge pix

awesome thread. this thing will fly. shouldnt have a prob gettin a 1.5 60'... the xp cam works AWESOME as a turbo cam. buddy of mine ran one in his regal with a stattama T67 Setup and dyno'd over 500 fwhp and tq. ran 11's with a 1.85 60'.
 
Re: Project "Stifler's Mom" Updated with gauge pix

Lookin for a motor...does that count as a thread update? The car has been sitting over 2 years..I need to get it going.....so it's going to.
 
You must log in or register to reply here.
Back
Top