Manifold Air Temp Guage?

[riceburner]

i was just wondering if there is a way to hook up a manifold air temp gauge? or maybe a way to take the temp gauge in the rv mirror and have it read intake temps?:th_question1:

 

[Bio248]

thats gonna be one hell of a heavy duty sensor to not burn up. youd have to tap that lower intake and put it in there.

 

[riceburner]

does it really get that hot in the lower intake mani?!?! i just want to see what the temps are of the air charge as it hits the cylinders...

 

[Street Wolf]

does it really get that hot in the lower intake mani?!?! i just want to see what the temps are of the air charge as it hits the cylinders...

The air is going through a blower, yeah it gets that hot.

 

[Bio248]

non-intercooled i think youd see temps of over 400* in there.

 

[IndeedSS]

ZZP mentioned in one of their write-ups about the blower outlet temps reaching almost 300*.

You would need and EGT sensor.

or something like this http://www.autometer.com/cat_accessorieslist.aspx?pid=33
or this http://www.aeroforcetech.com/EGT_components.html

 

[Bio248]

id think its a waste of time unless you were going to do one pre-intercooler and then one after it in order to record temperature drops. otherwise im not sure there is a lot of use for it.

now an EGT being used as an EGT...that would be useful.

 

[IndeedSS]

id think its a waste of time unless you were going to do one pre-intercooler and then one after it in order to record temperature drops. otherwise im not sure there is a lot of use for it.

now an EGT being used as an EGT...that would be useful.

I'm with you, at least at the time of this writing. It's too bad GM didn't use the manifold temps for PCM calculations instead of the IAT's. The tuning accuracy would be so much greater.

 

[riceburner]

what about the intake temp, in the intake itsself. is there a way to make the *'s on the rear view read the temps in the intake?

 

[Street Wolf]

what about the intake temp, in the intake itsself. is there a way to make the *'s on the rear view read the temps in the intake?

Why would you want it to show up on your rear view mirror anyways?

Buy one of these-
http://www.pfyc.com/pc/GN2110/GPGAU/AeroForce+Interceptor+Scan+Gauges+-+most+makes+and+models.html

If your going to do any kind of modding your going to need one anyways.

 

[riceburner]

i was going to buy one i was just kinda curious...thats all ideas running thru my head haha

 

[Street Wolf]

In the long run your going to end up saving money just buying one of those know. Not to mention it's a much easier set-up than anything you can come up with like that, plus it tells you a lot more than just your intake temps. Pretty much a must have.

 

[blowfishRus6]

^^^^^ man i want one of those so bad.. that will be my next mod

 

[IndeedSS]

I was told you can get the Aeroforce gauges from Pace for under $200 shipped with a clubgp discount. IIRC it was something like $189. Call Greg at ext 205 and ask. I didn't know this before I ordered mine from Maryland speed for 239 shipped.

 

[blowfishRus6]

hummm. nice to know that. might be getting one sonner than expected

 

[riceburner]

i want to get that and also AFR, volt, oil psi, and trans temp. used to looking at the firebird dash haha