• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Magnaflow Cat



Just buy a 3" in/out converter and bolt it in place of the straight pipe before it bolts up to your catback.

Also, buy a 3" converter from EBay...because PFYC is expensive as hell.
 
bluegtp91 said:
Just buy a 3" in/out converter and bolt it in place of the straight pipe before it bolts up to your catback.

Also, buy a 3" converter from EBay...because PFYC is expensive as hell.
Click to expand...


Thanks for the fast response. I did look on Ebay and all that i found where the high flow cats that are over $100 and one bullet cat that was close to $100 so surprisingly pfyc was cheaper. Arent the only ones that bolt on are the high flow cats? like the one below. If thats the case i would really just prefer the bullet cat since i want to keep the cat on the car. Do you have a cat that u prefer? Sorry if i sound kinda slow about this subject but i don't know a lot about cats at all.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?VISuperSize&item=260650801610
 
Interesting i have never heard of a non cat. What does it do? will it clean the emissions? Will it make the car a little quieter i don't really like the huge grumble/raspsy sound it makes now. Which i think it makes that noise because i have an exhaust leak, and i am hoping that welding on a cat will solve that issue. Also is there any gains? or will it rob the gains since a "non-cat" is going back on?
 




I'd opt for one of the HM series because most of the other ones supposedly don't do so well for emissions.

Sort of a "throw it on and I'll need a new one next time around" cat.
 
to be carb compliant it needs to be designed for that vehicle alone.

It wont matter because its for aftermarket exhaust.
 


Glad you got it figured out...but yes...if you could get away with it; get a fake converter from Frozen Boost
 
misterman said:
Interesting i have never heard of a non cat. What does it do? will it clean the emissions? Will it make the car a little quieter i don't really like the huge grumble/raspsy sound it makes now. Which i think it makes that noise because i have an exhaust leak, and i am hoping that welding on a cat will solve that issue. Also is there any gains? or will it rob the gains since a "non-cat" is going back on?
Click to expand...

matt5112 said:
Does it need to DO anything?

If not.... Frozen boost has a "non-cat" for less money.
Click to expand...


Will this also help with the grumble/raspsy sound it makes? Cause mine doesn't have a CAT either.
 
A catless system will have a little more "tone" to it...deeper sounding if you will...you WANT a resonator and non-chambered mufflers to keep the exhaust quiet since 3800's sound like crap regardless.
 
You must log in or register to reply here.
Back
Top