• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

MAF problem

K

Kasey

New member
So my cars rpms are jumping around alot at idle. Tried driving it and it would stall unless I kept my foot on the gas. I got a MAF sensor circuit high frequency code and my MAF is stuck at 46 lbs/min. tried unpluging it and it didnt seem to change the idle. Im going to try it again and take it for a drive but for now does anyone know what it could be?
 


so I took it for a drive with it unplugged and it seemed to run much better. It still wanted to stall sometimes when I came to a stop and the idle was still a little rough at times but not like it was with the maf plugged in. So is that my problem? Bad maf?
 
Yep thats usually how it works. Might want to clean the throttle body while you're putting the new one in. Then it should idle nicely.
 
You must log in or register to reply here.
Back
Top