• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Looking for extra power at the drag strip

i got a aem uego im pretty sure it can read in lambda but i havent tried to change it. but mid 11's is what i try to run, my first couple were lean and fixing that took care of a good majority of the kr. but my shifts are horrible up to 7*
 


run high 10:1 afr if you are actually managing to read KR on E85....

I find it very hard to believe you are actually knocking in reality.... I have ran up to 28psi on 14:1 afr without KR.
 
Log misfires and see if it starts missing in that range it knocks, should be able to tell tho, what plugs and gap are you running now?
 
alright ill have to do that, i never hear of feel any knock. put right now i got al104's im not positive on the gap atm i believe its around .050
 
You must log in or register to reply here.
Back
Top