Longtime Lurker

[gtpwannabe]

Thanks for the helpful post matt5112. That sound clip is basically what i am going for. Still trying to decide between 2.5 and 3 inch piping, and which mufflers and resonator.

 

[matt5112]

Resonators are great if you get one with a large volume.

If you're really looking for a good trick, there is this magical solution:

http://www.performancetrucks.net/fo...xhaust-resonator-tube-eliminate-drone-489463/

 

[gtpwannabe]

Ok so i think i will be going with either dynomax super turbo mufflers or thrush. One of these..

http://www.ebay.ca/itm/Thrush-Welde...Parts_Accessories&hash=item2c90d689a8&vxp=mtr

http://www.ebay.ca/itm/Dynomax-Supe...Parts_Accessories&hash=item51b9cb898b&vxp=mtr


Are these the right style muffler as far as size and inlet/outlet? And is either one better than the other? Thanks in advance.

 

[ItHurtz]

super turbo and welded are two completely different mufflers. super turbo has 3 big tubes inside, welded is a chambered, which is loud.

offset in/center out yes.

 

[gtpwannabe]

Ok thanks. I might be going with 3 inch exhaust. I am about to order these borla mufflers but i wanted to double check and make sure they were the right ones??

http://www.summitracing.com/parts/bor-40359

 

[ItHurtz]

yes

 

[NotEnoughGPs]

No more lurking. We need each and every owner of a w-body to be giving input on what they are doing to their car, so that the shared experience can benefit all owners.