• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Logging AEM Wide Band O2 with DHP analogue input

buickman104

buickman104

New member
I am finally ready to start using my wideband to tune. I read this post that shows how to use the EGR brown wire to read the voltage output from the wideband to tune.
http://www.grandprixforums.net/threads/84845-Wide-Band-Logging-thru-EGR-using-UVScan


I was unable to find a write up for logging with the DHP green analogue connector that connects to the box. I was wondering if anyone had any info on what pin should I connect the 0-5V output wire to? And how to calibrate it using UVscan? I would like to log my wideband without having to go through the EGR connector if possible.
 


the dhp has a label on the side which is ground and the other three inputs. once it is plugged in just log it in what ever scaner you use. but egr is deff the best way to go. no extra connections to fool with, tangle or break.
 
You must log in or register to reply here.
Back
Top