• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

let's talk custom roots blower swaps

Status
Not open for further replies.


Why couldn't one just mock up a S/C (KB,TVS,ETC) where it needs to go for the pulley to line up with the belt, measure it out on the intake manifold to where it'll sit on it and machine a spacer for it to bolt on? Maybe by using a mold/cardboard/wood/etc. Then you could machine the manifold to how you see fit so the blower can do it's job and the spacer will fit.
 


You better produce results here better than that pipe dream of building your wife's father's old pickup truck.
 
given that they dont sell that truck in the mean time while i have no money and space for it, ill have it one day.

as far as this swap. i am looking at other blowers. looking through the KB site last night looked fairly promising, but again i dont have a motor to play with.
 



I can't get an external vid till I fix the flex plate that let go the other night in this vid.

 
Last edited:



Ignore the massive trans slip thats a gen v on a 2.8 the tvs seams to have a higher pitch but a lower db from how it sounds
 
nick sent me a text today and suggested a walkinshaw blower. they are an aussie company that makes this blower swap for the holdens over there. turns out the kit is a TVS 2300 with a nice intercooler and long runner setup.

tvs 2300 swap? hm.
 
Status
Not open for further replies.
Back
Top