led turn signals and side markers

[tyty0594]

I have a 01grand prix and im trying to install the led bulbs for the front. I am getting the "hyperflashing" with the converters installed. Can anyone help with this issue?

 

[ADrugDealer]

Pretty sure you just need load resistors installed but im not an expert on this.

 

[camopaint0707]

load resistors would be a cheap fix, replacing the relay with a high flash relay would be a better option.

 

[02NavyBlue]

Get yourself an LED compatible signal flasher. Part #: EP28
Can be bought at advance auto parts, amazon, etc.

It's under the drivers kick panel, next to the steering column. It costs around $13-$15

 

[ADrugDealer]

That works as well.

Load Resistors or the flasher deal work well

 

[Bronco Boy]

Get the EP28. No need to hack up the wiring if you don't need to.

http://chrisb.users.superford.org/Grand_Prix/Projects/Clear_Corners/Clear_Corners.html

 

[illtacticz]

Will the EP28 work on the 2008 Grand Prix 6Clydr?

 

[HighOctaneRacing]

Will the EP28 work on the 2008 Grand Prix 6Clydr?

no. will not work for 04+.

 

[illtacticz]

So only other option is resistor in this case i presume?

 

[tyty0594]

I have a 01grand prix and im trying to install the led bulbs for the front. I am getting the "hyperflashing" with the converters installed. Can anyone help with this issue?

Sorry i ment "with the resistors installed". So yes i had the resisitors installed and i still got huperflash so i was thinking. Bigger resistors? Do the side markers have to be hooked up with the trun signals some how because they flash with turn signals? And i also forgot to mention but the green dash arrow stays solid as well??

 

[Bronco Boy]

And i also forgot to mention but the green dash arrow stays solid as well??

Read the link I posted.

Or get Canbus bulbs.