• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Leaking Antifreeze?

my engine bay is really clean, some spots on the side of the engine next to the water pump look kind of wet but is not pouring out antifreeze, but ill wipe that and see if it happens again.
 


Iceman6669 said:
I have heard something about the UIM cracking where it meets the TB. But I am SC so i dont have a whole lot of info on the NA stuff.. Srry.
Click to expand...

If he noticed a spot on the passenger side of the car, the UIM shouldn't be the issue.

I would do LIM gaskets, they could be shot after 2 years if using Dexcool without regular changes.

Where in Nebraska are you?
 
alright i decided to change the LIM gasket, i am almost done all i have left to do is torque down the plenum and plug everything else in. While it was apart i changed the spark plugs and wires, and the old plugs looked like they had dried coolant on them. Does this sound about right for the LIM gasket going bad?
 
You must log in or register to reply here.
Back
Top