KR/scan tool

[ldyzluvdis06]

I have been running with my current set up for a few few months now.....

ZZP S3 IC|ZZP pcm|HAI|Autolite 104's|Plog|ZZP 3" cat-less DP|SLP catback|180* t.stat|3.1|ZZP ported blower|Ported LIM|AFC||Aeroforce scan gauge|LC-1

and i have never seen ANY KR...well today i was making a couple WOT runs and was seeing anywhere from 1-5* of KR

the only thing that has changed was the other day the top came off of my breather...so i fixed (temp. duct tape fix) that because i thought that it may be causing a vac leak then made another few runs and was seeing the same thing.

wideband was reading about 11.3's, LTs locked at 0!

i know it is hard to tell w/o a scan posted but i have no way nor know how! any ideas?

also what is the best way to log a scan and post it online so you guys can help me out?

Thanks in advance!
DL

 

[SyntheticShield]

You can go here:
Scan Depot dot net

And you can upload your scans there directly from the .csv file or spreadsheet file.

 

[ldyzluvdis06]

what is a cheap scan tool to use though?

 

[SyntheticShield]

Well there are several out there on the market. But to scan for KR you need one that supports GM enhanced parameters. I dont know if HP Tuners has a built in scan tool or not, but if you went that route, for a little more you would have the tuner as well.

But for strictly scan tools, AutoTap seems to be the more popular one. What I would do is go to ebay and search on scan tools. There are a few really good ones that sell on there regularly. Just be sure they have GM enhanced parameters.