• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Knock sensors...

JKICK6

New member
I bought a motor from advance auto parts about 2 weeks ago.Motor has a slight ticking/knock/ping.I could not get the old knock sensors out of old motor so i proceeded to install new motor until i could afford 2 brand new knock sensors.Could motor be pinging because of not having either knock sensors hooked up?Car is not a daily driver.anyone have similar problems/experience with knock sensors on a 3800 series II .CAR IS A CHEVY MONTE CARLO SS
 


You need knock sensors or you are going to have goofy programming running the car. I've never tried it out, but you'll either get a butt ton of timing or none I would assume.
 


Make sure you torque them to the right specs.

And I dont think you can get at the rear knock sensor with the motor in the car, but I'm not 100% on that.
 
Back
Top