• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Just got a scan gauge, what do i need to look for?

blackflag

blackflag

New member
I just installed my aeroforce intercepter and I searched and saw lots of scattered things but i guess i need specifics. All I've looked at so far is Boost and KR.
Boost sits at about -19.0 at idle and I got a blip of 0.7*KR for about half a sec during a WOT run.
The vehicle is stock with the exception of a HAI. I plan to add headers before a pulley drop but with that little amount of KR am i safe to drop pulley and get a tune? what other factors do i need to look at? Thanks in advance.
 


I dont like having it on the boost setting.

the MAP in/hg is more better IMO, and did you have it on KR 1?

If you are stock, at around the top of the shifts, I bet it will see around 4-5* kr

Othwise, look at whatever you want, coolant temps, intake air temps, IGN ADV is another good one to see what kind of timing its running. Trans temp.
 
I do have it on Kr 1 ( i read the manual for awhile before i played with it). 0.7KR is right before the shift. So if my Kr is that low stock can I pulley down and get a tune?
 
You must log in or register to reply here.
Back
Top