• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Jake91's GTP thread



Ended up canceling my order with zzp and ordered intense bushings as they are a bit softer. Well anyways all is installed today Poly uppers and factory lowers this engine does not move now

3agadara.jpg
 


Just finished my brake upgrade. For anyone looking to do this it is a worthwhile upgrade. my only complaint is the pedal has a small dead spot the first 1/8 of travel (due to the extra fluid volume of dual pistons), but after that they bite hard, they will pretty much lock up the wheels by 3/4 down on most surfaces. As for install it was a strait forward brake job, they bold right up using all existing lines and hardware. The only thing you need to do is bend the hard line a bit to clear the bleeder screw. The parts required are calipers, brackets, rotors, and pads from a 2006+ monte/impala








Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top