• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Its Test time...

TorqueAutoMotiv

TorqueAutoMotiv

donated to get this wow
Getting the car ready to be towed to the school and heres the bolts that got messed up Parts tray got flipped and they got mixxed up
They are only from the ac compressor the throttle linkage to the tb the starter flywheel a ground or two basically the top stuff needed to take the engine out
Heres the test help figure out where they all go
I know a few of them but not all

6.fuel rail nuts 11. and 17. are the starter i think 14. Flywheel/TRQ conv bolts and 1 or 2 is engine mount bolts
IMG_0185.jpg
 


1 is def motor mount nuts, 17 and 11 i think are bellhousing (haven't had one apart in awhile though), 7 are flywheel cover bolts, and i think thats all i got man, good freakin luck lol
 
7. bolts for the plastic dust shield arounf the flexpate/tq conv
9. looks like the bolts that hold the egr to the head
11. looks like a bellhousing bolt. if its an 18mm then thats what it is
13. kinda looks like a lim or sc bolt

all i got for now
 
1.engine mount
6.fuel rail
7.plastic cover on trq/flywheel
11. & 17. Starter
14.flywhell/trq
Thats what i have so far all the bellhousing bolts are with my engine already
 
lol i went through the same thing man guess what this bolt is now i have then pretty much memorized after 3 rebuilds. lol
 


1.engine mount
2.Exhaust nuts
6.fuel rail
7.plastic cover on trq/flywheel
11. & 17. Starter
14.flywhell/trq

Slowly figuring them out come on guys i know theres gotta be someone willing to shed some light on the last few
 
or putting one in that fits, then later your short one because the one you have left is a 1/2 inch to short...been there
 


You must log in or register to reply here.
Back
Top