• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

is ubend delete enough

W

weissmertz

New member
i had my mechanic put on a 3.5 pulley when he changed my intake gasket.i know im going backwards on upgrade but it was a good time for me. now i need to get rid of some kr the highest ive seen is 5 and that is at high rpm. i dont want headers can i get by w/ just a ubend delete or do i need to get the downpipes.
 


You need to pulley up or you'll be meeting chip soon, a ubend will not be enough your gonna need a downpipe but even then I doubt you'll be kr free

Sent from my KYOCERA-C6745 using Tapatalk
 
rockers, with headers , or plog and 3 inch dp and then maybe you'll be kr free with out a tune. buy a tuner and you can cut timing till it stops knocking so that asshole chip dont show up and ruin the party.
 
buy headers before it blows up.

for reference, this is chip, he's an asshole.

004_zpsiv2dlk93.jpg
 




3" dp with stock manifolds will be fine. I'm assuming you already have an intake, colder plugs and a tstat. If you still have knock, you may need more mods.
 
ive seen over 9 degrees of knock retard in my 2005 at full throttle. Im running a 3.6 pulley, headers, intake, colder plugs and I have an Overkill PCM on the way. however, I noticed a few days ago the #2 coil post is rusty. Im hoping once I replace the coil my KR goes down a bit since the #2 spark plug will fire like its support to.
 


gtppower what do you mean an intake and how helpful is colder plugs i thought that wasnt needed till more mods smaller pulley
 
You must log in or register to reply here.
Back
Top