• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Is this why i can't use my shifter?

Bluemagic

Bluemagic

New member
Ok can't use the shifter without pressing the shift lock switch. Did some digging and found this
IMAG0059.jpg


Why is this cut smh. What exactly are these wires that have been cut?
Sent from my HTC One using Tapatalk 2
 


What do you mean you can't shift without pressing the shift lock lever? Like from D-1? or from park to reverse to drive? And where are those wires located, and what year?
 
if those wires are in the console, that could be why its locked in park on you. look for a plug with cut wires where ever its located.
 
99 gtp in a 98 gt shell. Those wires are under the center console right by the shifter.

Sent from my HTC One using Tapatalk 2
 


The plug for those should be on the base of the shift lever. It's kind of a pain to get it out, but I found shifting into 1 helps give you room to wiggle it out.
 
I'd hit a junker and grab the pigtail with about 4 inches of wiring. Reconnect and smile when your car works properly.
 
Funny story.. your cars PO probably cut it and then sold it to you. You bought it effed up. Now go get it and fix it.
 


finally found the connector. After looking again. Is there a way to connect to the wires to the connector again? I mean they are cut off at the base of the connector. Can u just pop the silver pieces out?

Sent from my HTC One using Tapatalk 2
 
Sure..it's tough w/o the proper tool for pinning etc. Or you can do it the super quick and easy way I suggest.

Your choice...Battle Royale or BillBoost method.
 


You must log in or register to reply here.
Back
Top