Is my pulley size correct

[SleeperGS]

First off, I know we have to scan, scan, scan, but I dont have that capability right now. My best time at the track is 14.2's since the new tune. Mods are....3.4 pulley, ported blower case, heat shield, headers, 3 inch full exhaust, "im an idiot" and bought the alt. rewire kit, MSP CAI w/Spectre filter, AL103's, 8mm wires, headers are wrapped, no converter, poly mounts, new trans and engine mount, oversized tensioner pulley, 3800series.com tune and case relearn, 93 ocatane only, havent had it scaned since the placement of the tune. Should I move up, or down a pulley, or should I let sleeping dogs ya know....sleep, until I move up in the world of modifications. Obviously i have to ahve it scaned, I know. Thoughts please.

 

[TheOtherNick]

Scan and see, you will need a custom tune to go smaller.

 

[boostedcompg]

with no custom in car tune id say your ok on the 3.4....but until you can scan scan scan dont mess with it least you go boom boom boom

 

[matt5112]

try warmer plugs.

I doubt those are burning nicely.

 

[SleeperGS]

Go to 104's then?

 

[blueguy]

Go to 104's then?

Yeah...maino.

 

[matt5112]

and watch those after 10 thousand miles and you might want to go warmer yet.