• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

intercooler install



omg dude you are lean as ****kk im betting...your injectors are done. their better be someone around you that you can pay to tune that cuz that is not good by any means....21 is pretty much maxed so you went well over
 


There seems to be some confusion as to what a "maxed out" injector is.
20ms @ 6000rpm is 100% duty cycle

OP seems like he needs a custom tune... no reason to have an IPW that high on a 3.4 pulley.
 
Check your engine coolant temp sensor and your IAT sensor to make sure they're functioning normally. If one of them is messed up it could cause your PCM to just open the injectors and run them static at WOT.
 


You must log in or register to reply here.
Back
Top