intake....

[gotboost3]

ok this is my temporary intake.....





now my question is...how much better will a wizaired perform opposed to this? the wizaired is what i want but if the difference wont be alot better than id rather just get a downpipe so i can throw the 3.5 pulley on....

 

[SyntheticShield]

Moved. Come on people, its not that hard to get these in the right area.

 

[Bio248]

wizaird wont perform much better than that at all. id just leave that one on there actually.

 

[boosting98]

maybe add a smooth aluminum tube to it.

 

[UR LOSN]

the HAI does very well. I would kep it.

 

[98 GT]

where do u guys put the computer if u do a CAI.

 

[Bio248]

right where it was sitting before.

 

[gotboost3]

i switched to a HAI/FWI to get more of a ram effect and still utilize both CAI and HAI its not blocked off from the engine bay and now is 100% smooth 4 inch piping...big ass difference from the first intake i posted...pulls hard for just an intake made with 25$ at home depot and powdercoat....








11 inch k&n sits perfectly 1/2 way in and 1/2 way out of the fender...

 

[blowfishRus6]

there you go.

the only thing the wizair is gonna help is to keep hot air out, which it does do a good job i must say.

 

[98 GT]

right where it was sitting before.

and u just leave it out in the open or what. i did a cone filter on stock pipe and left the air box in. i wanna take the box out but i didnt know wut to do to the computer

 

[Bio248]

you can get a pcm tray, but otherwise just tie it down somehow.

 

[FuglyGTP]

That looks like a pretty sweet setup you got there. I used a piece of a metal strap to hold the pcm against the radiator support. screwed the strap to the support. PCM looks ugly but it works.

 

[JBONE]

How long is that PVC pipe section? I am thinking of building one like this.

 

[BoostJunki3]

this thread is old....how do you people find these things....lol

run a 22.5 bend and a filter dont run any tubing....CAI are for panzy's