• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Installing sub in 99 grand prix gt

protoplayer

New member
So i have the all the wiring sub and amp i just ned to figure out how i would put it all in i mean it was easy on my explorer but the GP seems to be a bit more challenging any threads or write ups that i should look at
 


The remote wire should be the yellow one in your wiring harness, but you can use any ingniton switched source as a remote.

Or just use an add a fuse on the radio fuse...
 
That or you can make your own ground spot with sand paper and a drill. Depends on how clean you want it to look when you're done.
 


were would it go cause i am looking in the trunk and there are a few spots were i could put it just dont know how well it would work
 
Back
Top