• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Installing 6 1/2 Inch Front Speakers [*]

webracin

webracin

New member
This HOW TO on Installation of 6 1/2 Inch Front Speakers has been added to the How To Section and can be found HERE.

This write-up is by syc0path on CLUBGP. I sent him a PM asking for permission to post it on this forum. Permission was granted.

webracin
 




Ok, I think I found the problem....can anyone check it out and let me know if the links are working?

webracin
 


very good, I did find I had to modify my door panel for 1 set of 6.5's, and I found it the hard way by listening to the buzz, so make sure you double check before cranking the system
 
So im thinking of just replicating the stock brackets out of some shhetmetal which i will later cover in some kind of dynamt. what ya think?
 
Wow this is a beating around the bush way to do this. The stock brackets just need some slight modification and the 6.5"s will fit just fine, I've done it twice (two different cars).
 
Hello
How did you get the inner door panel off for this. I am planning on replacing the factory speakers with a component set and want to know how to remove door panel?
 
Right underneath/behind the grab bar thing in the middle there are two screwws. take those off and you can then unclip the whole panel from the door. Be careful not to break the clips they are plastic. After its off the door just unhook the wires and you're good to go
 


I know this thread is very old but the link in the first post(what this write up is about) isnt working. Well at least for me its not.
 
You must log in or register to reply here.
Back
Top