• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Installed new mirrors w/blinkers



Tap them into the blinkers on the corner lights?

That's what was done with my halo's.

Otherwise, not so sure...I'm not a wiring guy.
 
Not that you give us enough info, we need more. Who made them..what they have for connections etc.

Overall though, tap them into the rear turn signal. That way they don't come on and stay on at night.
 
I'm pretty sure I read somewhere that you can splice into the wires at the steering column. Perhaps explore that option. I have Monte mirrors that I am in the process on. I will update if I should finish before you.
 
Hold on a second on that.

Here is what I would do, it's only what I consider the best, easiest and cleanest way...so trust me when I tell ya how I'd do it. I used the factory pins and location in the factory connectors for my puddles and directionals.

I'd get the mirror side of the connector from a stock car with about 3-5 inches of wiring left on it. Then you connect your mirror to those wires, because you are going to have ground, up/down, left/right etc in that one connector. No reason to connect a ground to the structure of the door, when GM has a ground there for you to use in the wiring.

On the blinkers, I tapped in either at the bcm or where they ran along the body. All you need to do is find the schematic that tells you which wire and you are good.
 


I used the wires from the old mirrors for the motoring. So, I'm not worried about that. It's just the wires for the blinkers/parking light I'm not sure on. Anybody know where I can get the car wire schematics or should I go to a dealer?
 
You must log in or register to reply here.
Back
Top