• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Installed 6.5" components in front doors, No modding required.

Peacher213

Peacher213

New member
So I lucked out with my Boston Acoustic s60's They fit in my door without making any rings. The magnets cleared the windows too. Just a little FYI.

I would like to add, I had to drill the screws in at an angle. But worked beautifully.
 


Sounds like you got lucky. I'd like to do 6.5's if I replace my front speakers again. Those s60's look like a pretty shallow speaker though.
 


All I had to do was grind away a little on the existing plastic mount. Kenwood slid under it a bit and install was done.
 
I took out the stock baffles. The BA's fit right in the door. Granted they dont aim at the driver and passenger like Id want. I suppose I could always do that later.
 


You must log in or register to reply here.
Back
Top