• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Installation/Repair Guide

streetsmart

streetsmart

New member
Hey there everyone,

I have an 04 Comp G and I am looking to do my rotors and brakes myself come summer time. My father used to be a mechanic and said that he would help me but suggested I get a repair/installation manual for guidance if needed. Does anyone have a manual or website that they recommend? I was looking at the Haynes manual but it says it doesn't cover GTP's.

Any advice you can give would be greatly appreciated!

Mike:D
 


Brakes on your Comp G require the same procedures as the brake that are covered in the Haynes Manual that you have. A big thing that some people forget, is when you push back the pistons on the caliper, make sure toi break the bleeder first.

Good luck!!
 
Blown97 said:
A big thing that some people forget, is when you push back the pistons on the caliper, make sure toi break the bleeder first.
Click to expand...
another thing that people forget is to take the cap off the master cylinder, i've heard that if you do this you won't have to bleed the brake
 
no anytime u open the bleeder u have to bleed the system. There is a tool u can get to push the piston back with out opening the bleeder. It looks like a calk gun. I prefer to use that rather than to have to open the bleeder.
 
You must log in or register to reply here.
Back
Top