• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Im disapointed at Type R's

Status
Not open for further replies.

Toofastgs

New member
Ok so one of my speaker pods came lose. So took panel off. Since i was in there i had a set of Type R Component speakers. So i said what the hell good time to try them out see if i like them. Get them hooked up to both sides.

This is where the first problem came my morels have a sensitivity rating of 90DB. Type R's 87. Ok so have to set the gain up.

2nd issue, Sound quality. I have to say im very disappointed in these. I listened do some tracks i know and it was just missing something only way i can describe it is clarity and did not sound like the mid rang was there.

3rd issue is these are too easy to distort. My morels took what i threw at them. Now that i have to turn the gain up (i mean i had to almost double the gain) to get these speakers to preform the amp is now starting to clip :-/

Im not using a cheap amp by any means. I am using an Eclipse EA400. 150watts RMS or 175 peak.

I spent a good couple hours redoing my eq settings due to fact different speakers require different eq. I got them sounding better but still seems like it is lacking.

I really wish i had a oscilloscope so i can peak the amp. But i dont so tomorrow im gonna try the next best thing and that is finding the AC voltage the speaker output should be putting out and tuning it with a DMM.

I used to be big in audio and such but after the years im losing my touch :-/
I know that speaks will change after about 20hrs of play time. I know my morels did and you could tell, they starting singing like no other.

So im going to give these type R's a month and see where they stand. So far im not to impressed. Also because i dont want to mess up my nice tight door panels. LOL

Sorry about my rant. Any one have any experience with Type R components.
I know i was down grading when i swapped them out but i was not thinking it would be that big of a difference. Another way i can describe it seems like i went from a new Z06 to a stock GTP
 


Status
Not open for further replies.
Back
Top