• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

idle...HELPPP

G

gotboost3

New member
ok guys i noticed my car vibrating like crazy at stop lights...first i thought it was a dp rubbing issue....but no i watched today and everytime im slowing down as im almost stoppped my rpms dip down to about 450 and they keep dipping slightly at the light from 850-650 and the dipping is causing the vibration almost like it keeps coming close to a stall....what would cause this i know i got a vacuum leak because my ltft's are +16.4 any ideas if i brake torque and raise the idle myself the vibrations go away...so i wanna fix it lemme know...
 
Last edited:


Re: idle...

canister purge solenoid right? i did break that during the 1 piece pacesetter install lol i glued that shyt back together i bet some glue bloked it haha would you def say thats it then? will that fix my trims??
 
Re: idle...

mine is doing the same but sometimes my car just dies outa nd starts then dies right back out but when i start it and punch it for about 15 sec. it just goes back to regular idle like nothing even happened. i just changed my MAF sensor and crak shaft sensor also and did a full tune up on it. any help?
 
get a can of carb spray and spray it on the motor on the suspected spots. if the idle changes when you spray it at an area then youve found your vacuum leak.
 


I was like where in the heck did my post go! I did not realize this was a different thread until just now lol
 
you should definately try and consolidate your threads. change the title and ask more/different questions if need be. no reason for you to have 3-4 threads on the first page all created by you.
 


You must log in or register to reply here.
Back
Top