• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

hub assembly questions

B

BeastBelle

New member
hi I'm new to the forum thing and have a few questions ill be putting up pics and stuff soon. but for now I'm working on replacing my wheel bearings my passenger side is f'ed the driver side is a mystery when everything is bolted up and all the driver side i move and it grinds a bit take it out and it moves fine could that be cause the passenger side is so screwed.
 


just changed the wheel bearing and the car rides like a Cadillac but now my Traction control light is on and my abs stays on any tricks on getting that to turn off without a computer
 
Make sure they are connected all the way. The abs and trac lights are in because it's not reading one or more of them right
 


if it's not plugged in all the way then yes it should go out when reconnected. If it still stays on the inspect the wiring from the hub connector to the EBCM along the lower control arms. Pull back the black convoluted tubing and inspect the wiring for any breaks, give each wire a slight pull and if you see it stretch then you found your break and will need to splice in some new connections on the broken wire to repair it.
 
You must log in or register to reply here.
Back
Top