• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

How do i get this out?

keonmakesbeatz

keonmakesbeatz

New member
Just the little motor thingy in the fuel pump
86a2f2894f02fc49b2d09ec5ba7bea88.jpg
 


should be a small hose clamped to it. all the pumps ive done have some sort of small easy clip as well to release it from its bracket.
 
How do I get this

843566a14301e645946c69b57e012c54.jpg

0fbc358183908bab36c945b4d92926d9.jpg


To go to this

e54c440bb7da85d5f373370668fd0dbf.jpg


3b22a5dd8f7a4db38789925f86175078.jpg



This is what I have to work with

0d33fe40b9c305518eff4bc79687d153.jpg


I want to get the pump from the white one ad put it in the other one
 
looks like 2 screws. unplug it, and pull that line off.

most come apart with little thinking, id work on the canister you dont need. that way if you break something its not the canister you need and you can learn on it.
 


that last hose looks like it just pushes over the nipple there.

with a pair of pliers twist the line back and fourth till it moves on the pump, then wiggle it off.

work on the one you cut first, twist it loose.

when you buy a new pump it comes with this hose new. so be careful if its brittle feeling.
 
Scottydoggs said:
that last hose looks like it just pushes over the nipple there.

with a pair of pliers twist the line back and fourth till it moves on the pump, then wiggle it off.

work on the one you cut first, twist it loose.

when you buy a new pump it comes with this hose new. so be careful if its brittle feeling.
Click to expand...

Lubricating oils wouldn't be a good idea would it?
 
Yea that looks like the one I have. I got the little piece off that was stuck on the new pump now I have to find the WD40 for the hose that im reusing.
 


not on its own. like i said that would come with the new pump, and local parts stores seem to no longer sell just the pumps kits.

work as easy as you can, twist it, then wiggle and pull up on it.
 
this is why a new pump comes with the new hose. try a pick under the end, maybe it will loosen up some. it should come off.
 


Scottydoggs said:
this is why a new pump comes with the new hose. try a pick under the end, maybe it will loosen up some. it should come off.
Click to expand...

Well that makes sense...... Hopefully this will work........ I've tried a couple things but it seems to kinda rip it. I'll be putting a clamp over there areas where it's slightly damaged
 
keonmakesbeatz said:
Well that makes sense...... Hopefully this will work........ I've tried a couple things but it seems to kinda rip it. I'll be putting a clamp over there areas where it's slightly damaged
Click to expand...

if fit tears you can try a parts store, or order and wait for the hose from wbodystore


this maybe a risk, but try warming the hose with a lighter, the heat should make it soft and let it come off. not to much heat, warm it slowly.
 
You must log in or register to reply here.
Back
Top