• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

HIDS, Alignment and Flickering

Spartan GL

Specialist Walter US Army
Alright

I have a Set of Black Halo Projecter headlights

with 6000k HIDS.

My Passenger side is Fine.

My Driverside HID Randomly shuts off

And when both of them are on They kinda look misaligned like I really dont know how to explain it except it looks kinda square then drops down Not like a normal headlight would Display the light on the road

the Light they give off isnt displaying like normal is there a way to fix that?
 


Do you have pics of the light pattern, that may help us a little more.
Maybe one from the front and one in the car..

For the one that shuts off, check you grounds, I have found thaty Hid's need a very clean ground.
 
Ive been Tinkering with it

and Dash Z

and a few other people said it might be a Wattage Problem?

any thoughts on that


Photos coming soon
 
do you have the reay harness? It draws a constant 12 volts off the battery. HIDs are also very powern specific, batteries are not a steady voltage all the time, hid's don't like this. My suggestion would be to buy the relay if you don't have it. If you have it it could possibly be a bad ballast or ground like I said before.

Hope this helps a little!
Eric
 
well if the ballst was DEAD the Light wouldnt come on at all

and if the ground was bad again it wouldnt come on


I think its a power problem

for some reason ONE of my lights gets plenty of power
the OTHER is being a douchebag.

='[
 


Where can i pick up the Relay for the HID's?


and the Odd light pattern is because they aren't aligned properly figured out what i need to do about that
 
switch the ballast from one side to another. if the other light does the same... then you have ballast issues. if the same side light still flickers.... you require the HID harness.
 
Back
Top