• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

hid question

T

t wizzle17

New member
I bought the error eliminators for my high/lows and have never had a problem and I put hid in my fog lights and now it says my highbeamsbarebon and on my hud it flashes sometimes . Would I be better off also getting error eliminators for ny fogs ?? I'm running 8k DDM FOGS
 


My hids trip the high beam indicator all the time, I've just ignored it really. I think because the fogs are on the light slows up dim on the dash and light up in the HUD.

I just run VVME low beams with retro fits.
 
Check the wiring. Beam indicator comes on when wires are hooked up wrong. I have no eliminations, just a harness, and everything works as it should, even the HID fogs.
 
Bronco Boy said:
Check the wiring. Beam indicator comes on when wires are hooked up wrong. I have no eliminations, just a harness, and everything works as it should, even the HID fogs.
Click to expand...

+1
Mine did the same thing. Never noticed I had the relay harness wired wrong until I got rid of the sh*** headlight housing's I had. Once I went back to some new factory housings I noticed I had the low and high beam pinned out wrong. Before I fixed it with just parking lights and fogs on the high beam indicator was dim in dash and flickered occasionally in the HUD. After I switched the pins on the headlight plug for the relay harness that issue disappeared.

Sent from my XT1080 using Tapatalk
 
You must log in or register to reply here.
Back
Top