• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Heres my GTP

Nickell said:
this pulley looks like a 3.2
Click to expand...

Pulley is a 3.6.

and for all of you who cant read, at the top it says has all the supporting mods as well, that isnt the full list. Only thing that i didnt do is the headers yet, and cam and stock bottom end are the only things i didnt touch. 0 KR btw because tune is on point because he knows why hes doing. If it had KR the car wouldn't be taken ou and driven. And its not abused either its not a daily. She sits in the garage
 


I'll answer whatever questions you guys have i don't have a problem with that. Just don't come in with comments and inputs on the car when you don't know anything about it.
 
JoeyGTP said:
I'll answer whatever questions you guys have i don't have a problem with that. Just don't come in with comments and inputs on the car when you don't know anything about it.
Click to expand...
It wouldn't be GPF without the comments. They are all knowing here even though you know your car better than anyone else.
 
Joey dont let them get to you. Know you did it right yourself, and if they cant read or ask screw it. But im glad you joined, and thanks again for the help on tire sizes on instagram.
 
6e021010b2a7ca472ab0b9be76ca123d_original.gif


lower it !
 


JoeyGTP said:
I'll answer whatever questions you guys have i don't have a problem with that. Just don't come in with comments and inputs on the car when you don't know anything about it.
Click to expand...

This is the Internet we are going to criticize you and no that's a silly question we can't read but really am sharp looking car
 
A 3.6 on a Gen V is roughly equal to 3.4 on a Gen III if I'm not mistaking.

Your car Will love you with a set of headers. Wait for SD headers to come back in stock or get some SSAC headers. Those are two options if your on a budget.

Either way, Sharp looking car man.
 


DanPrixGTP said:
A 3.6 on a Gen V is roughly equal to 3.4 on a Gen III if I'm not mistaking.

Your car Will love you with a set of headers. Wait for SD headers to come back in stock or get some SSAC headers. Those are two options if your on a budget.

Either way, Sharp looking car man.
Click to expand...

Yeah maybe 3.4 equivalent, i was going to say 3.5. Its either of those yeah. And i would get SSAC ones. My friends SSAC and SLP's were out of the car they look exactly the same and for a fifth of the price and he was running mid 11s on them.
 
Either way as long as its not knocking you should be in the green. We just don't tend to encounter people who have the car tuned, they get online and read about people dropping pullies and doing swaps to GenVs and think its ok on a stock motor. Also believe we have heard "its got supporting mods", but it don't.

This is one of the best GP forums for info because we prefer to not have people come back screaming "You made me blow my motor", "you said I was safe with a 3.0 pulley on a stock motor with just an intake and a "jet chip" off ebay!"... these things don't settle well. So you will have to excuse us coming off as mean, we just get concerned when we see something out of place, and typically a GenV with a smaller pulley and no headers is a ticking time-bomb.
 
A Gen V to a Gen III is essentially a .2 pulley size difference.

So in retrospect, you could run a 2.55 pulley on a Gen V which would equal a 2.35 on a Gen III
 
TLsheff summed it up very well the "I have the support mod" thing comes up often and after some questioning realizes that they don't and by then the damage is probably already dont.
 


TLSheff said:
Either way as long as its not knocking you should be in the green. We just don't tend to encounter people who have the car tuned, they get online and read about people dropping pullies and doing swaps to GenVs and think its ok on a stock motor. Also believe we have heard "its got supporting mods", but it don't.

This is one of the best GP forums for info because we prefer to not have people come back screaming "You made me blow my motor", "you said I was safe with a 3.0 pulley on a stock motor with just an intake and a "jet chip" off ebay!"... these things don't settle well. So you will have to excuse us coming off as mean, we just get concerned when we see something out of place, and typically a GenV with a smaller pulley and no headers is a ticking time-bomb.
Click to expand...

Yeah when you put it that way i can respect that. But yes guys car is tuned good. Friend that did it had 11sec GTP he built and tuned himself so everythig is on point with no knock. No $25 ebay tuner here haha. Headers will come if i decide to keep building on the car, even if i don't they prob will still be done. Just did the GenV this winter so car has only been out twice with it done. Seasonal driveway queen no winter driving !
 
Friend that did it also tuned another friends turbo GTP, then ZZP did a dyno tune and they said the tune was already perfect. So if ZZP said his tuning is good then that is more than enough for me
 
Couldn't have said it better myself most people's "supporting mods" are an eBay KandN filter and a tune is something that comes in the mail lol my cars tuned with a stock pulley GenIII and it helps, this is a clean car and a nice build welcome to the forum
 
You must log in or register to reply here.
Back
Top