• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Help with vacuum T's

Nickell

New member
Hey guys my vacuum T under my snout got a big tear in it. Took it out and the line also was broke off in 1 end. Went to all the auto stores and they dont sell rubber T's like I need. Where can I get a T and maybe the line as well? Thanks, cars out of comission until i get one..
 


like this.

limjob11.jpg
 
i looked around, the rubber T's are not to be found at a parts store, just plastic T's and vac tubing. get the small ones.
 
it leads to the map sensor, i left that line stock, stuck the stock tube into vac line to the T.

the vac line leads under the sensor, you can pop that one off and run a new vac line to it as well if you need to.
 


They make those plastic t's in different sizes. Run a vac line from the LIM port to a plastic T then connect your two other lines.
 
Back
Top