• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Help with SES codes

K

kstanko

New member
My 3.8 SC on a 2000 GTP has random misfiring. Seems to be when under a load or at a constant speed. Code P0352- knock sensor, code P1361 Ing. Control Circuit Low Voltage, and P1362 Ing. Bypass Circuit. Replaced Ing. Control Mod about six months ago, plugs and wires 2 weeks ago. Check resitance on coil packs, both primary and secondary, check out within specs. All vacum lines seem to be in good condition. Anyone with ideals on what the issues may be.
 


Ok, look your codes up at Gearchatter.com They have the FSM pages for the codes on the site. The diagnostic aids and the diagnostic charts may lead you to things we haven't thought of, since the info was put together by the engineers that developed the systems.
 


Tried gearhead, not much help. Did find issue, ICM I just replaced in May went bad. Good thing it was warrentied. Thanks for the help.
 
You must log in or register to reply here.
Back
Top