Help with Cold Air Intake

[Biohazardvi]

So I am building a custom cold air intake. I dont wanna use 3 inch tubing for it. Anybody have ideas for some 4 inch tubing. I was thinking about 4 inch PVC with some rubber fittings and painting the PVC black, but that isnt eye appealing. Or any ideas where I could buy 4 inch material tubing meant for cars. I checked Pepboys, but all they had was 3 inch tubing. Thanks.

 

[TorqueAutoMotiv]

try an exhaust shop my buddys shop has like 20 feet of 4" stainless thats been there for over a year. Might not be likely in all shops but its worth a try

 

[CTKGP09]

summit racing has alot of different 4" piping and coupling options that i used to make mine

 

[vailskier3]

check the how to section of the forum...lots of good info there...

 

[Bogers04SS]

First off....Welcome. If you want the 4in route, Lowes sells 4in pvc pipe. Then you could paint along with your dogbones and strut bars and have a brighter engine bay. This is the cheaper route. It's all up to what your going for.