HELP! Projector cutoff height?

[Alix0r]

so i am getting my retros all lined up and i was wondering what the cutoff height should be at X distance?... right now i am about 20 ft away from the wall and my cutoff lines are about 3- 3-1/2ft high.??? ( i am lowered about 1.5-2.0" if that matters) what should be about the proper height? thanks!

 

[Alix0r]

Re: Projector cutoff height?

so heres pic.. i wish i had a damn garage so i could use the door but unfortunately this is what i have to work with lol... also im not quite sure how the cutoff "steps" should be.. like how far apart?

 

[REDCRAPGP]

Just because I'm lazy

http://www.hidplanet.com/forums/showthread.php?10848-HOW-TO-aim-HID-headlights/page7

Blah.

I would suggest riding around after and make sure that's where you want them before sealing the lenses

 

[2003 SSEi]

X2 on the hid planet link....but if it dosent make sense

pull up to a wall
mark the top of the headlight cutoff
pull straight back 25 feet
the headlight cutoff should drop 2.1"

Drive around to make sure you like it, seal up the lights

 

[Alix0r]

Ya i drove around last night with them and i think they are lined up pretty well... the top of the cutoff is about right at the trunk of a car when behind the car.

 

[91parkave]

Remember you can still aim up/down after you set the projectors IMO just make sure you don't get the beams crossed at distance. Keep them straight as possible.