• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

help on drag suspension setup

ok so here's what i have decided let me know what you think. KYB GR2's, stock front springs, zzp lower control arms if i can justify spending that much on them, w-body store rear heightening springs, cable mod(that ****s way easy and seems smart) does anyone know if the kyb's still have the piece that goes across to tie off the cable to?
and whats this about LSD? as in limited slip diff?
also has anyone on here used toyo proxis drag radials? I'm doin a turbo build and need some GOOD sticky tires so if you dont know anything about these do you know of some drag radials?
 


wbody store heighteining springs are just olds intrigue springs. MT ET drag or hoosier QTP's for tires
 
If this car is going to be driven on the streets then do not get the zzp lca's, I think even says on the site that they are for track use. There was some don Rome control arms that added extra bracing to stock ones but I don't much more info than that.

Yes limited slip differential. It's basically the same as the intense LSD but put together better. http://www.engineered.net/
 
Jus cuz I'm curious which one did you get the street or race version? I'm just curious how it will do with this turbo/tranny build and how its worked for you sp far I dont want TO much and start messin the tranny up lol.
And are all the intrigue springs the same or what year are they from do ya know?
 
I think they are the same but I'm not sure.

You know I'm actually not sure, he had one ready to ship when I ordered it but I think it's the street one. Ill have to look at my emails to him.
 


Struts are shot anyways so I gotta do those,but the cable mod is jus for the track right? And do you pull those cables tight or leave a lil slack in them?
 
Yup email him or call, I emailed and he got back to me pretty quickly. Looking back in my emails we didn't mention which one it was so I'm assuming its the street version.

The cable mod you want it tight so that when you lower the car back down the rear stays up. All struts for our cars should have that hole in them, it's the hole for the sway bar link if you were using the strut on the other side. Yes the cable mod needs to be done at the track and taken out before you drive home. Otherwise you'll have little control of the rear end. Get some hoosers, I don't think that's how you spell it, slicks and put them on a set of torque stars and you'll be at a good start. Learn how to hook with them and you'll be in good shape.

There's a track prep thread on here somewhere, maybe in the how to section, read that over a few times.
 
You must log in or register to reply here.
Back
Top