• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

help me deside



Go with a dp or pcm. If you build your own intake you would still have enough for the OBX headers on ebay. I have never used them, but I have not really herd anything bad about them. I plan to buy some this winter to try them out.
 
Personally with $350.00, I'd build a Fenderwell intake like you had said. Get a set of colder range spark plugs (Autolite 605's or NGK TR55's), 180* T-Stat...both of those will run ya like $20 total. Then I would spring for a 3" DP (catless) with the U-Bend deleted. Those are normally about $150 new from ZZ Performance. Then you get a $50 rebate for sending your converter back as store credit (which then you could use to buy the plugs and t-stat from them lol)

Then I would go get a PCM. 3800 Performance - high performance aftermarket car parts for your Grand Prix, Monte Carlo, Impala, Regal, Bonneville, and V6 F-body!! has the DHP for sale there. CAn't recall a price just go check it out. PFYC - PartsForYourCar.com - Performance Parts and Accessories for Your Late Model Vehicle also has the DHP. After having a crappy ZZP PCM I'd go with DHP hands down for good now.

So...

ZZP 3" Race Bolt-in DP - $139.99 + S&H ($50 rebate for converter)
ZZP 180* T-Stat - $9.99
Autolite plugs - $10.99
DHP PCM - $99.99 +$100 Core Charge (which you get back upon return of your stock PCM)
Fenderwell Intake...whatever you deem necessary

That should be a good start. Hope it helps.
 
you can get a PCM from INTENSE. make a cold air intake, get a 180 tstat, make sure the fan settings in the PCM are for a 180* stat. a downpipe would be good too
 
You must log in or register to reply here.
Back
Top