• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Help determine a decent port job

jayroca

jayroca

Banned
I'm about to pull the trigger on these self ported heads from a buddy of mine and I want to know what you guys think here I looked but Its seems like it was a mild port job the bowls look somewhat but please help determine:

IMG_7376_zpsde0f8650.jpg


IMG_1924_zpsdfc3b76a.jpg


IMG_7259_zpsc267ff03.jpg


IMG_8013_zps38aeeb91.jpg


Anyone could share insight thanks!!!

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
 


Look carefully at the valve seat face on the head to make sure there are no gouges that will cause the valve to not seal properly. Just from the photo it is seen that whoever did the work to those heads was not careful enough to keep the tool OFF the seats.
 
You must log in or register to reply here.
Back
Top