• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Heater Core Install

Your going to have to bend them a bit. I did the heater core on my gp and it sliced right on in. You could also try and get one tube in and the other should fall into place
 


PizzaAndDoughnuts said:
Could I get that email?

My problem is that I thought I pulled everything apart but the pipes to the old core wouldn't come out of the fire wall. I was able to knock them out, but now I can't get the new pipes in. What am I missing? What haven't I removed? I don't knee why I'm having a problem.

The best part of this story is that I was so fed up with the heat stakes that I just ripped off the cover piece by piece. It can't be reused.

I'm about to give up. Any ideas on installing? Any idea on where to find a replacement cover? I can't find one. Worried.
Click to expand...

most have a screw holding the two pipes to the fire wall, if you look from the out side you can see the screw coming out the between the two pipes.

once the screw is removed the whole core comes out.
 
You must log in or register to reply here.
Back
Top