• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Headers are IN!!!!

Lsick7

Lsick7

Tofu Delivery Boy
I just got SSAC headers and how the heck am I supposed to get the rear header in place? Bolting it in will be no problem, but how do I get it in? Magic? Help please!
 
Last edited:


Re: Can't get rear header in!!!

Rock engine all the way forward strap it then probably going to have to remover the valve cover and some have had to remove rockers aswell
 
Re: Can't get rear header in!!!

Yeah you might have to pull the valve cover. My heads were off when I did mine so I did not have an issue.
 
Re: Can't get rear header in!!!

luckily when i do my togs the engine will be out all together
But hey means its a good time if you havent done it yet to change your valve cover gaskets
 
Re: Finally got the rear header in!!!

It cost me a few cuts and a lot of bleeding but I got it. I fired it up and of course it is leaking like crazy, (thats what you get with slip in pipes). But the exhaust tone is deeper and a lot more aggressive. Let it run for about 10 minutes and watch the smoke roll off new pipes and listen to the flap flap flap of the leaking crossover. I'm taking it monday to get it all welded and all should be good!

Thanks to all for the suggestions! I did exactly what you guys said rock the motor all the way forward and pulled the valve cover. Albeit it didn't go right in, but it gave it the room to wiggle it in and work!

I took it for a quick spin with my pops who just got home from work. We first listened to it to make sure it was just an exhaust leak and not a knock or lifter tap (which would make no sense seeing how it was fine like a day ago but who knows, crazier things have happened). Took it for a quick whirl and needless to say ENDLESS topend power.

Bluegtp was right, my car did fall off hard from 5k up, now it pulls all the way through the powerband and hard. I looked at my dad and said, "runs pretty good don't it?" He looked at me and said "Yea! That thing got to 60 in no time", Then he goes "DON'T TELL MOM, She hates that you have this thing" Lol, my mom is so scared of me and my brothers maniacle cars. Anyway, an excellent bang for the buck mod, i'll have to wait for them to be all sealed to really dive into how it feels and sounds. But for right now, I'm tired and will never do a header install myself AGAIN!!!!(probably a lie but it's worth a shot)

2w3dd7r.jpg
 


nice bro. glad you got the headers on. i was wondering when you were gonna do that. now you should make a new video man.
 
superv6 said:
nice bro. glad you got the headers on. i was wondering when you were gonna do that. now you should make a new video man.
Click to expand...
Thanks, I'll definitely post up a new vid. Oh and another question for eveybody, is it okay to delete both o2 sensors on the rear mani and downpipe by just getting it tuned to read fine? Cause i really can't get my o2 sensor off my old rear manifold.
And to answeer the other question, no i didn't have a plog before hand, although, if anyone is interested I have a 2.5" ZZP cat-less downpipe for sale since it's useless to me now. Only has about 1k miles on it.
 
Lsick7 said:
Thanks, I'll definitely post up a new vid. Oh and another question for eveybody, is it okay to delete both o2 sensors on the rear mani and downpipe by just getting it tuned to read fine? Cause i really can't get my o2 sensor off my old rear manifold.
And to answeer the other question, no i didn't have a plog before hand, although, if anyone is interested I have a 2.5" ZZP cat-less downpipe for sale since it's useless to me now. Only has about 1k miles on it.
Click to expand...

You can't delete the 02 sensor that was on the rear manifold. The 02 sensor by the cat is only used to determine if the cat is working. You could get a filler for the hole that's in the new d/p section granted you will get a "check engine" light unless you delete the p0420 code out of the pcm.
 
Wait...your beating on your car with NO front o2? OMG O_O

Put that thing back in so your PCM knows what to do man...
 


When you have them weld up your headers you might need a new 02 bung my 02 sensor hits the floor of my car. I plan on welding in a new one next time my car is on a lift.
 


01GTP said:
Also you need to buy an extension harness for the sensor or you have to make your own.
Click to expand...

Yea, lol, I figured that out yesterday the hard way! So it's still sitting, but i did order an extension from zzp that should be here tomorrow. Which o2 hit your floor? The front or the rear? My front one clears fine it's the rear, which i don't use, that would seem to pose a problem.

Oh yea Bio, I had been following your new car thread. Good choice on the Subaru, they have a great motor and they are so sexy!!!
 
Last edited:
crap I have an extra O2 harness that I would have givin you at a good price
I ordered 2 by accident and there is a way easyer way to get teh rear in I wish you would have looked up my thread that I did a month or so back because damn I spent for ever and found all you hacd to do was rock the engine forward and remover the trans dipstick and the header slides right in from the side not pushing wiggleing or anything. Oh Well glad you got it in I just got the TDC FWI as well car screams now real NICE SOUNDS AWSOME

Here itis with out the rest of the exhaust hooked up
http://www.youtube.com/watch?v=tGcyRmakh1A
 
You must log in or register to reply here.
Back
Top