• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Header question.

A

acidronin

New member
I was trolling around ebay yesterday and found an auto salvage yard parting out a 2000 gtp. They listed a set of pacesetter headers as stock manifolds for 100$ shipped.

I immediately jumped on it.

Afterwards I noticed it doesn't have the flex/downpipe. So basically it ends at the y pipe.

Did I get a good deal? Can I have an exhaust shop fab something up?
 


You could get a shop to do that.
I believe zzp down pipe will hook up to them.
Someone correct me if I'm wrong though
 
from the pics i see on line it looks like a 3 bolt flange. so any shop can make you a dp and weld in a cat if you need one.
 
No ZZP DP will bolt up to a Pacesetter downpipen except for a Pacesetter downpipe.

Just buy cheapo Speed daddy headers off EBay.

Done and done.
 
Orr.... just buy a 3 bolt flange, zzp flex and a 2 bolt 2.5inch flange for the stock catback, exhaust shop could weld you together a pacesetter DP for like 30-40 plus the stuff I listed.
 


Yeah. Shop local to me made a weld in downpipe section for my RWD 3800 pacesetters for 20$, but that was just 2 welds. Should be in that price range and you'll have some used pacesetters for about 200ish. Not a super deal but not a bad deal either... As long as they don't leak.
 
You must log in or register to reply here.
Back
Top