• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Have a feeling this is sposed to be plugged in someplace. Help Please!

burgundybullet

burgundybullet

Modded for Maximum Slow
So I was poking around in my engine bay last night and I came across this plug that wasnt connected. I have a feeling it is sposed to go somewhere but i couldnt seem to find where. Anyone know where its sposed to go to?!



DSC01562.jpg
DSC01563.jpg
 


Judging by the location I'd say nothing. I have that plug on my 00 GT as well and nothing is connected to it, nor has it ever. Just for some option I don't have.
 
I had the same plug on my old GT.I believe it is for an L67 MAP sensor.GM decided to let it be in some GTs but it helps if you plan to top swap, its just plug and play considering you buy the MAP extension harness.
 
dmahlikGT said:
I had the same plug on my old GT.I believe it is for an L67 MAP sensor.GM decided to let it be in some GTs but it helps if you plan to top swap, its just plug and play considering you buy the MAP extension harness.
Click to expand...

Map sensors are three wire. That's no map sensor. May have been the plug in for the Cali emissions soleniod.
 


The L36/L26 and L32 map sensor connector is all the same. A three wire with a purple seal (IIRC) around it for weather proofing. That connector he has is a two wire.
 
that might be the evap solenoid but i think bill is right and went to one of the emission things that earlier models had
 


Annnnnt sorry Ride.. he's not a 97 like you are. Therefore he doesn't have a evap purge switch, only a single valve, which in his year is likely mounted on the front of the motor with a red two wire connector.

You can tell some about his year by the engine cover bracket in the pic. He's newer. Likely an 02.
 
iRideGTP said:
When I grow up, I want to be as knowledgeable as you Bill.lol.

Sent from my SGH-T679 using Tapatalky 2
Click to expand...


Work on a lot of the same basic car. It also helps that I pulled a motor last night on a car with Cali emissions and the plug looks identical. My Bonne was a 97, that I 99 harnessed laster and found all the differences. Only years with the two evap pieces was 96 and 97 ... 96 the GP didn't get a 3800
 
BillBoost37 said:
Annnnnt sorry Ride.. he's not a 97 like you are. Therefore he doesn't have a evap purge switch, only a single valve, which in his year is likely mounted on the front of the motor with a red two wire connector.

You can tell some about his year by the engine cover bracket in the pic. He's newer. Likely an 02.
Click to expand...

Is there a difference between the 02 and 00?
 


You must log in or register to reply here.
Back
Top