GTP won't run with MAF SENSOR

[Drink gas]

My 99 gtp will not run only for about three minutes with te sensor plugged I'n until you unplgue it , it will run fair but when u give it gas there is a bog and knocking when it builds boost , PLEASE!!! help

 

[FordMan77]

Sounds like you need a new MAF. With it unplugged it is running off of preset tables and will not run its best, but will run. Don't drive it with the MAF disconnected unless you desparately have to. If you do, then it may be a good idea to remove the SC belt. I'm not an S/C guru but I swear I've read that here before.

 

[BillBoost37]

You can drive on the tables, but don't go beating it. Drive as though you have part of it's leg cut off... nicey nice...

I agree, you seem to need a maf sensor.

 

[blueguy]

Morad Parts Company - 3800 Motors, Transaxles, & Stock Parts

Get one from him.

 

[Drink gas]

It's a brand new one I have put two I'n the last three days I don't know whT else to really do

 

[taman86]

iac sensor maybe?

 

[DanGTP]

Check the voltage of the reference wire and make sure it is 5 volts. If it's much higher, you may be frying the new sensors. Possible electrical short somewhere?