• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

GTP Triple Black



it is hard to keep clean lol. my dream gtp is a midnight blue coupe. cant find any anywhere
Saw one where I live, southern Illinois, but it look like it wasn't taken care of very much with burnt out tail lights and bulb burnt out on third brake light. Looked sharp still. It looked a 2002 version with leather and Bose
 
D0584FF1-F80D-4D99-8ACE-E0489AAB1A65-2900-000001B14AFD347E.jpg

2069DBE1-4EC3-48B6-A3CC-2522B3FAC688-2900-000001B1516B4EBF.jpg


EDB1F46F-C9F0-4A19-85D1-928B923DC480-2900-000001B15BE8D89F.jpg


Shined her up the other day
 


The lights look good, 6000K OR 8000K ? I always get those mixed meaning which one is whiter. I was going to get the black housing but not smoked. I fixed the bouncing on the red Pontiac by getting a piece of Styrofoam say 2 inches by 2 inches and putting between the metal part of the bumper and the plastic just below the headlight. It also covers the gap left underneath the aftermarket headlights
 
Last edited:
Thanks, I didn't even know that. I thought 8000 was white. Saved me some money. Should get my stereo tomorrow, just took apart the dash and getting ready for it. They included the dash adaptor with stereo for free but I hope they sent me the flush mounted, if not, going to have to take apart later to upgrade. Either way I still have to buy the steering wheel control. Which one you recommend?
the HIDs are 4300k

never get anything but 4300k everything else is blue and looks cheep
 


I just picked one up from eBay for $45 which wasn't really that bad, never installed in the red Pontiac but I will install in the black one. I have them in my ford and use them allot.
I don't have steering wheel controls there really useless not worth the extra 80 bucks
 


One wire to the OBDII the other ro the fuse box (with an add a fuse in it) done. And yes I only plan on having one gauge
 
Back
Top