• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Group Buy

SD GTP

SD GTP

New member
Hey guys,

I know this may be a little taboo but I didn't see a thread about this over here. Mike is doing a group buy on Scan Gauges for $150 shipped over on ClubGP. They look like a great unit and a good answer to anyone who doesn't have a scanner. The unit is small and compact and can fit right on your steering column if you choose.

Before everyone asks, yes, it does read KR. Anyway, Here is the link to the manufacturers site if you want to check it out. The link for the group buy can be found under the "sponsors specials" section of ClubGP.

ScanGaugeII - Trip Computers + Digital Gauges + Scan Tool

Just trying to help some people out.
 


I think I'm going to get one after researching them a bit. They are on ebay all day long for $159 shipped. I'll pay the extra $9 to not have to wait until he figures out a cutoff date.
 
It reads KR? When did this happen? Where is that shown at because I have wanted this device in the past but held off because it didnt read KR?
 
It has "Add-a-gauge" now so you can add the KR gauge to it yourself, along with several others. And at no extra charge I might add.
 


Abrasive said:
It has "Add-a-gauge" now so you can add the KR gauge to it yourself, along with several others. And at no extra charge I might add.
Click to expand...


I did not know this. Well, if it has that kind of access, then why couldnt it monitor things like tranny fluid temp and stuff like that. I might have to now revisit this thing a bit.
 
I thought they all displayed KR. I know a lot of people with these and they all read KR just fine. I looked into them before they were even on the market and said they would display KR back then before they were out. I have read a number of problems, no lighting working, not powering up, intermittant operation, etc, but as far as I know the latest versions havent had any issues like the earlier ones.
 
SyntheticShield said:
I did not know this. Well, if it has that kind of access, then why couldnt it monitor things like tranny fluid temp and stuff like that. I might have to now revisit this thing a bit.
Click to expand...

Tranny temp? It can. ;)

--->>> ScanGaugeII - Trip Computers + Digital Gauges + Scan Tool <<<---

Can check and clear trouble codes

Included on it are:
Fuel Economy
Fuel Rate
Battery Voltage
Coolant Temperature
Intake Air Temperature
Engine Speed (RPM)
Vehicle speed (MPH)
Manifold Pressure (not available on some vehicles)
Engine Load
Throttle Position
Ignition Timing
Open/Closed Loop

Also includes Trip Computer with:
Maximum Speed
Average Speed
Maximum Coolant Temperature
Maximum RPM
Driving Time
Driving Distance
Fuel Used
Trip Fuel Economy
Distance to Empty
Time to Empty
Fuel to Empty


Add-a-gauge feature allows you to add:
Horsepower
Elapsed Time Since Engine Start
Knock Retard
Barometer V6
Barometer V8
A/F Ratio
Remaining Oil Life
Engine Torque
Transmission Fluid Temperature

Looks like you can also add LTFT and STFT to it also.

Complete listing of Add-A-Gauge features in pdf here:
http://www.scangauge.com/support/pdfs/XGAUGE.pdf
 
Interesting find.... Every one that I have seen/used in a customers car has always been able to read KR, LT and ST fuel trims.
 


If it reads the data link port...won't it basically do the same things that the aeroforce gauges do right out of the gate?
 
Looks like it will, it's just not programmed to begin with to convert the data is what it looks like to me. All that code you have to enter in the Add-a-gauge looks basically like it is it's deciphering tool to decode the information it's reading. For the price, I don't mind adding in the codes and really, since it will display 4 parameters at once, you're getting what you can only do with 2 aeroforce gauges.

My only dislike is it's odd shape. Not as easy to find a spot to put it as a 2 1/16" gauge and not have it look ghetto.
 
I like my aeroforce a lot...

They might have problems wiring up the scanguage, in my 01 gtp I have to use a seperate power source, some years get the power from the obdII, some years won't power up without a good power source.
 
FoSHO99 said:
I like my aeroforce a lot...

They might have problems wiring up the scanguage, in my 01 gtp I have to use a seperate power source, some years get the power from the obdII, some years won't power up without a good power source.
Click to expand...

X2 I absolutely love mine....probably some of the best money I've ever spent on things for the car.

The scan gauge looks like a great deal, if you could figure out a sweet way to mount and trim it up, I'm sure it will be a worthy project.
 


I hopped on that group buy. I like the idea of something small to toss in once in a while for monitoring.
 
You must log in or register to reply here.
Back
Top